Magnavox MDR537H Owners Manual - Page 11

Introduction Connections Basic Setup Rear Panel FUNCTIONAL OVERVIEW 12 3 4 VIDEO VIDEO IN OUT Y L L ANTENNA R IN R AUDIO IN (L1) S-VIDEO AUDIO OUT OUT S-VIDEO 12 11 10 9 8 7 COAXIAL 6 5 AC plug 1. ANTENNA IN jack Use to connect an Antenna / Cable Box / Satellite Receiver for RF Pass Through only. 2. VIDEO IN jack (L1) Use to connect External device with an RCA video cable. 3. VIDEO OUT jack Use to connect a TV monitor, AV receiver or other device with an RCA video cable. 4. HDMI OUT jack Use an HDMI cable to connect to a display with an HDMI compatible port. 5. AC Power Cord • Connect to a standard AC outlet to supply power to this unit. • Unplug this cord from the AC outlet to completely shut down the unit. 6. DIGITAL AUDIO OUTPUT (COAXIAL) jack Use to connect an AV receiver, Dolby Digital decoder or other device with a digital audio coaxial input jack with a digital audio coaxial cable. 7. S-VIDEO OUT jack Use to connect the S-Video input of a TV monitor, AV receiver or other device with an S-Video cable. 8. COMPONENT VIDEO OUTPUT jacks Use to connect a TV monitor with component video inputs with a component video cable. 9. AUDIO OUT jacks Use to connect a TV monitor, AV Receiver or other devices with a set of RCA audio cables. 10. S-VIDEO IN jack (L1) Use to connect an External device, by an S-Video cable. 11. AUDIO IN jacks (L1) Use to connect an External device with a set of RCA audio cables. 12. ANTENNA OUT jack Use to connect an RF coaxial cable to pass the signal from the ANTENNA IN to your TV. Note • Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. • This unit does not have the RF modulator. Recording Playback Editing Function Setup Others Español EN 11