Motorola Rapture VU30 Verizon User Guide - Page 17
charge the battery - drivers
View all Motorola Rapture VU30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
charge the battery New batteries are not fully charged. Before you can use your phone, you need to install and charge the battery. Some batteries perform best after several full charge/discharge cycles. To charge using the charger: 1 Insert the charger into the micro USB port on your phone as shown. 2 Plug the other end of the charger into the appropriate electrical outlet. 3 When your phone displays Charge Complete, remove the charger. When you charge the battery, the battery level indicator at the upper right of the screen shows charging progress. At least one segment of the indicator must be visible to ensure full phone functionality while charging. To charge from your computer: You can also charge your phone's battery by connecting a cable from your phone's micro USB port to a high-power USB connector on a computer (not a low-power one, such as the USB connector on your keyboard or bus-powered USB hub). Typically, USB high-power connectors are located directly on your computer. Both your phone and your computer must be turned on, and you must have correct software drivers installed on your computer. Cables and software drivers are available in Motorola OriginalTM data kits, sold separately. Notes for charging your phone's battery: • When charging your battery, keep it near room temperature. Never expose batteries to essentials 15