Netgear WNDAP330 WNDAP330 User Manual - Page 103
Enabling Wireless Bridging and Repeating, Wireless Point-to-Point Bridge, Enable
UPC - 606449056464
View all Netgear WNDAP330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual Table 4-1. QoS Queues and Parameters (continued) QoS Queue Data 2 (Best Effort) Data 3 (Background) AIFS (Arbitration Inter-Frame Space) cwMin (Minimum Contention Window) cwMax (Maximum Contention Window) Max. Burst Length Description Medium priority queue, medium throughput and delay. Most traditional IP data is sent to this queue. Lowest priority queue, high throughput. Bulk data that requires maximum throughput and is not time-sensitive is sent to this queue (FTP data, for example). Specifies a wait time (in milliseconds) for data frames. Valid values for AIFS are 1 through 255. Upper limit (in milliseconds) of a range from which the initial random backoff wait time is determined. Valid values for the "cwmin" are 1, 3, 7, 15, 31, 63, 127, 255, 511, or 1024. The value for cwMin must be lower than the value for cwMax. Upper limit (in milliseconds) for the doubling of the random backoff value. Valid values for the "cwmax" are 1, 3, 7, 15, 31, 63, 127, 255, 511, or 1024. The value for cwMax must be higher than the value for cwMin. Specifies (in milliseconds) the Maximum Burst Length allowed for packet bursts on the wireless network. A packet burst is a collection of multiple frames transmitted without header information. Valid values for maximum burst length are 0.0 through 999.9. Enabling Wireless Bridging and Repeating The ProSafe 802.11n Dual Band Wireless Access Point WNDAP330 lets you build large bridged wireless networks. Select the desired wireless access point mode for your environment: • Wireless Point-to-Point Bridge. In this mode, the WNDAP330 can communicate with another Bridge mode Wireless Station and with Wireless clients if you select the Enable Wireless Client Association check box. When you click the Edit button, you must enter the Profile Name and the MAC address (physical address) of the other Bridge mode Wireless Station in the fields provided. WEP, WPA-PSK, or WPA2-PSK are supported. WPA2-PSK can (and should) be used to protect this communication. • Wireless Point-to-Multi-Point Bridge. Select this only if this WNDAP330 is the "Master" for a group of Bridge-mode Wireless Stations. This mode supports default association with Wireless clients. Advanced Configuration v1.0, May 2008 4-11