Netgear WNDAP330 WNDAP330 User Manual - Page 72
Remote Console, Read-Only Community Name, Trap Community Name, IP address to Receive Traps
UPC - 606449056464
View all Netgear WNDAP330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual 2. Enter the following information in the SNMP fields: • SNMP: Enable SNMP to allow the SNMP network management software, such as HP OpenView, to manage the wireless access point via SNMPv1/v2 protocol. • Read-Only Community Name: The community string to allow the SNMP manager to read the wireless access point's MIB objects. The default is Public. • Read-Write Community Name: The community string to allow the SNMP manager to read and write the wireless access point's MIB objects. The default is Private. • Trap Community Name: The community string to allow the SNMP manager to send traps. The default is trap. • IP address to Receive Traps: The IP address of the SNMP manager to receive traps sent from the wireless access point. The default is 0.0.0.0. Remote Console The Remote Console configuration features are located under the Maintenance tab, Remote Management, and then under Remote Console. Enter the following information in the Remote Console screen, as shown in Figure 3-2: • Secure Shell (SSH): If set to Enable, the Wireless Access Point will only allow remote access via Secure Shell and Secure Telnet. The default is Enable. • Telnet: If set to Enable, the Wireless Access Point will only allow remote access via Telnet. The default is Enable. 3-2 Management v1.0, May 2008