Netgear WNDAP330 WNDAP330 User Manual - Page 35
Time Zone., NTP Client., Use Custom NTP Server., Hostname / IP Address., Apply. - default ip address
UPC - 606449056464
View all Netgear WNDAP330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual Figure 2-6 2. Configure the following information: - Time Zone. From the pull-down menu, select the local time zone for your wireless access point from a list of all available time zones. The default is USA-Pacific. - NTP Client. Enable NTP Client to synchronize the time of the access point with an NTP Server. The Default is Enabled. Note: You must have an Internet connection to get the current time. - Use Custom NTP Server. Check the option if you have a custom NTP server. The default is Disabled. - Hostname / IP Address. Enter the host name or the IP address of the custom NTP server. The default is time-b.netgear.com. 3. Click Apply. Basic Installation and Configuration 2-9 v1.0, May 2008