Netgear WNDAP330 WNDAP330 User Manual - Page 32
Access Point Name, Country/Region, name with a unique name up to 16 characters long.
UPC - 606449056464
View all Netgear WNDAP330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual Figure 2-3 4. Enter the Access Point Name of the WNDAP330. This unique name is the access point NetBIOS name. The default Access Point Name is located on the bottom label of WNDAP330. The default is netgearxxxxxx, where xxxxxx represents the last 6 digits of the WNDAP330 MAC address. You may modify the default name with a unique name up to 16 characters long. 5. From the Country/Region pull-down menu, select the region where the WNDAP330 can be used (the default Country/Region is the United States). Note: If your country or region is not listed, please check with Netgear Support. 2-6 Basic Installation and Configuration v1.0, May 2008
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
2-6
Basic Installation and Configuration
v1.0, May 2008
4.
Enter the
Access Point Name
of the WNDAP330.
This unique name is the access point NetBIOS name. The default Access Point Name is
located on the bottom label of WNDAP330. The default is netgearxxxxxx, where xxxxxx
represents the last 6 digits of the WNDAP330 MAC address. You may modify the default
name with a unique name up to 16 characters long.
5.
From the
Country/Region
pull-down menu, select the region where the WNDAP330 can be
used (the default Country/Region is the United States).
Figure 2-3
Note:
If your country or region is not listed, please check with Netgear Support.