Netgear WNDAP330 WNDAP330 User Manual - Page 111
If using DHCP, all WNDAP330 Wireless Access Points should be set to Obtain an IP
UPC - 606449056464
View all Netgear WNDAP330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual • If using DHCP, all WNDAP330 Wireless Access Points should be set to "Obtain an IP address automatically (DHCP Client)" in the IP Address Source portion of the Basic IP Settings menu. • All WNDAP330 Wireless Access Points use the same SSID, Channel, authentication mode, if any, and encryption in use. 4. Verify connectivity across the LANs. A computer on any LAN segment should be able to connect to the Internet or share files and printers with any other PCs or servers connected to any of the three WLAN segments. 5. Click Apply to save your settings. Note: You can extend repeating by adding up to two additional WNDAP330s configured in repeater mode. However, since Repeater configurations communicate in halfduplex mode, the bandwidth decreases as you add Repeaters to the network. Also, you can extend the range of the wireless network with NETGEAR wireless antenna accessories. Advanced Configuration v1.0, May 2008 4-19