Netgear WNDAP330 WNDAP330 User Manual - Page 93
Advanced Configuration, IP Settings for Wireless Clients
UPC - 606449056464
View all Netgear WNDAP330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Chapter 4 Advanced Configuration This chapter describes how to configure the advanced features of your ProSafe 802.11n Dual Band Wireless Access Point WNDAP330. The advanced configuration features are located under various sub-menus under Configuration and provide the following functions: • IP Settings. Using the wireless access point as a DHCP server for wireless clients. • Hotspot settings. Enabling HTTP redirect. • Wireless Settings: Configuring advanced wireless LAN parameters. • Access Point Settings: Enabling wireless bridge and repeater modes. IP Settings for Wireless Clients You can turn this access point into a DHCP Server for wireless clients for both DHCP-enabled wireless clients as well as for static-IP enabled clients. The default advanced IP wireless settings usually work well. This feature is intended for use by a systems administrator. By default, this feature is not enabled. To use this wireless access point as a DHCP server: 1. From the main menu under Configuration, select IP, and then select DHCP Server Settings. The DHCP Server Settings screen will display. 2. DHCP Server is disabled by default, as shown in Figure 4-1. Select the Enable radio button to enable this wireless access point as a DHCP server. 4-1 v1.0, May 2008