Netgear WNDAP330 WNDAP330 User Manual - Page 38
Logging In Using the Default IP Address, Open a Web browser such as Internet Explorer, Mozilla Firefox - default password
UPC - 606449056464
View all Netgear WNDAP330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual Logging In Using the Default IP Address After you install the WNDAP330, log in to the wireless access point to configure the basic settings and the wireless settings. The WNDAP330 is set, by default, with the IP address of 192.168.0.230 with DHCP disabled. Note: The computer you are using to connect to the WNDAP330 should be configured with an IP address that starts with 192.168.0.x and a Subnet Mask of 255.255.255.0. To log in using the default IP Address: 1. Open a Web browser such as Internet Explorer, Mozilla Firefox, or Netscape Navigator. 2. Connect to the WNDAP330 by entering its default address of http://192.168.0.230 into your browser. The login screen will display. Enter admin for the user name and password for the password, both in lower case letters. Figure 2-8 3. Click Login. 2-12 v1.0, May 2008 Basic Installation and Configuration