Netgear WNDAP330 WNDAP330 User Manual - Page 82
Using Activity Log Information, Enable SysLog, SysLog Server IP Address, Port Number, Apply
UPC - 606449056464
View all Netgear WNDAP330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual Figure 3-9 2. Enable SysLog - Enable this option if you have a SysLog server on your LAN. If enabled, you must enter the IP address of your SysLog server and the port number your SysLog server is configured to use. The default is Disabled. 3. SysLog Server IP Address -The access point will send all the SysLog to the specified IP address if SysLog option is enabled. Default is 0.0.0.0. 4. Port Number - The port number configured in the SysLog server on your LAN. Default is 514. 5. Click Apply to save your Syslog settings. Using Activity Log Information The Activity Log screen displays the Access Point system activity. 3-12 v1.0, May 2008 Management
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
3-12
Management
v1.0, May 2008
2.
Enable SysLog –
Enable this option if you have a SysLog server on your LAN. If enabled,
you must enter the IP address of your SysLog server and the port number your SysLog server
is configured to use. The default is Disabled.
3.
SysLog Server IP Address –
The access point will send all the SysLog to the specified IP
address if SysLog option is enabled. Default is 0.0.0.0.
4.
Port Number –
The port number configured in the SysLog server on your LAN. Default is
514.
5.
Click
Apply
to save your Syslog settings.
Using Activity Log Information
The Activity Log screen displays the Access Point system activity.
Figure 3-9