Netgear WNDAP330 WNDAP330 User Manual - Page 56

Configuring the RADIUS Server Settings, hand menu - password

Get Netgear WNDAP330 - ProSafe - Wireless Access Point PDF manuals and user guides
UPC - 606449056464
View all Netgear WNDAP330 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual Configuring the RADIUS Server Settings You can setup or modify the RADIUS Server settings to compliment Network Authentication security options. The RADIUS Server must be used with Legacy 802.1x, and can be used with WPA and WPA2 Network Authentication. When using a RADIUS Server, the RADIUS Server settings must be configured before completing the Network Authentication security profile (see "Configuring WPA with RADIUS" on page 2-36, "Configuring WPA2 with RADIUS" on page 2-37, or "Configuring WPA and WPA2 with RADIUS" on page 2-38 for specifics on implementing these security options). Note: The RADIUS Server Settings apply to all profiles. They only need to be configured once per wireless access point. To set up or modify the RADIUS Server Settings: 1. From your Web browser, log in to the WNDAP330 using the default LAN address of http://192.168.0.235, user name admin and password password, or use the LAN address and password that you set up. 2. Under the Configuration tab, select Security on the main menu, select Advanced from the lefthand menu, and then select RADIUS Server Settings. The RADIUS Server Settings screen will display, as shown in Figure 2-14. 2-30 v1.0, May 2008 Basic Installation and Configuration

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
2-30
Basic Installation and Configuration
v1.0, May 2008
Configuring the RADIUS Server Settings
You can setup or modify the RADIUS Server settings to compliment Network Authentication
security options. The RADIUS Server must be used with Legacy 802.1x, and can be used with
WPA and WPA2 Network Authentication. When using a RADIUS Server, the RADIUS Server
settings must be configured before completing the Network Authentication security profile (see
“Configuring WPA with RADIUS” on page 2-36
,
“Configuring WPA2 with RADIUS” on
page 2-37
, or
“Configuring WPA and WPA2 with RADIUS” on page 2-38
for specifics on
implementing these security options).
To set up or modify the RADIUS Server Settings:
1.
From your Web browser, log in to the WNDAP330 using the default LAN address of
, user name
admin
and password
password
, or use the LAN address and
password that you set up.
2.
Under the Configuration tab, select Security on the main menu, select Advanced from the left-
hand menu, and then select RADIUS Server Settings. The RADIUS Server Settings screen
will display, as shown in
Figure 2-14
.
Note:
The RADIUS Server Settings apply to all profiles. They only need to be configured
once per wireless access point.