Netgear WNDAP330 WNDAP330 User Manual - Page 76
Browse, Apply, Upgrade. The Firmware Upgrade screen will display as shown
UPC - 606449056464
View all Netgear WNDAP330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual The Web browser used to upload new firmware into the WNDAP330 must support HTTP uploads, such as Microsoft Internet Explorer 6.0 or above, or Netscape Navigator 4.78 or above. Figure 3-4 To upgrade the WNDAP330 firmware: 1. Download the new software file from the NETGEAR website, save it to your hard disk, and unzip it. 2. Under the Maintenance tab, select Upgrade from the main menu, and then select Firmware Upgrade. The Firmware Upgrade screen will display as shown in Figure 3-4. 3. Click Browse and browse to the location of the image (.RMG) upgrade file. 4. Click Apply. When the upload completes, your wireless access point will automatically restart. The upgrade process typically takes about 1 minute and 30 seconds. 3-6 Management v1.0, May 2008