Netgear WNDAP330 WNDAP330 User Manual - Page 108
Configuring a Point-to-Multi-Point Wireless Bridge
UPC - 606449056464
View all Netgear WNDAP330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual 5. Verify connectivity across the LAN 1 and LAN 2. A computer on either LAN segment should be able to connect to the Internet or share files and printers of any other PCs or servers connected to LAN Segment 1 or LAN Segment 2. 6. Click Apply to save your settings. Configuring a Point-to-Multi-Point Wireless Bridge To configure a point-to-multi-point wireless bridge as shown in Figure 4-9: 1. Under the Configuration tab, select Wireless Bridge on the main menu. Then, select Bridging and Repeating. The Bridging and Repeating screen will display. Figure 4-9 2. Configure the Operating Mode of the WNDAP330 Wireless Access Points. 4-16 v1.0, May 2008 Advanced Configuration
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
4-16
Advanced Configuration
v1.0, May 2008
5.
Verify connectivity across the LAN 1 and LAN 2.
A computer on either LAN segment should be able to connect to the Internet or share files and
printers of any other PCs or servers connected to LAN Segment 1 or LAN Segment 2.
6.
Click
Apply
to save your settings.
Configuring a Point-to-Multi-Point Wireless Bridge
To configure a point-to-multi-point wireless bridge as shown in
Figure 4-9
:
1.
Under the Configuration tab, select Wireless Bridge on the main menu. Then, select Bridging
and Repeating. The Bridging and Repeating screen will display.
2.
Configure the Operating Mode of the WNDAP330 Wireless Access Points.
Figure 4-9