Netgear WNDAP330 WNDAP330 User Manual - Page 94
DHCP Server, Starting IP Address, Subnet Mask, By default
UPC - 606449056464
View all Netgear WNDAP330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual . Figure 4-1 3. Configure the following TCP/IP configurations for using the WNDAP330 as a DHCP Server for wireless clients. • DHCP Server: By default, the Dynamic Host Configuration Protocol (DHCP) server is disabled. If you have a DHCP server on your LAN and you enable DHCP, the wireless access point will get its IP address, subnet mask and default gateway settings automatically from the DHCP server on your network when you connect the WNDAP330 to your LAN. • Starting IP Address: Enter the starting IP address that can be assigned from the DHCP server on this Access Point. • Ending IP Address: Enter the Ending IP address that can be assigned from the DHCP server on this Access Point • Subnet Mask: The Access Point will assign the specified subnet mask to the connected wireless stations. 4-2 Advanced Configuration v1.0, May 2008