Netgear WNDAP330 WNDAP330 User Manual - Page 74
CLI Commands, Enter, admin, password - default login
UPC - 606449056464
View all Netgear WNDAP330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual • Baud rate: 9600 bps • Data bits: 8 • Parity: none • Stop bit: 1 • Flow control: none These settings appear below the connector on the back panel. 3. Press Enter. The screen shown below in Figure 3-3 should appear. Figure 3-3 4. Enter the login name and password (admin and password are the defaults). After successful login, the prompt should appear. In this example, the prompt is netgear74F35E. 5. Enter help to display the CLI command help. CLI Commands The CLI commands are listed in Appendix C, "Command Line Reference." 3-4 Management v1.0, May 2008
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
3-4
Management
v1.0, May 2008
•
Baud rate: 9600 bps
•
Data bits: 8
•
Parity: none
•
Stop bit: 1
•
Flow control: none
These settings appear below the connector on the back panel.
3.
Press
Enter
. The screen shown below in
Figure 3-3
should appear.
4.
Enter the login name and password (
admin
and
password
are the defaults).
After successful login, the <
Access Point Name
> prompt should appear. In this example, the
prompt is
netgear74F35E
.
5.
Enter
help
to display the CLI command help.
CLI Commands
The CLI commands are listed in
Appendix C, “Command Line Reference
.”
Figure 3-3