Netgear WNDAP330 WNDAP330 User Manual - Page 44
a/na, Wireless Mode, Turn Radio
UPC - 606449056464
View all Netgear WNDAP330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual 1. From the main menu under Configuration, select Wireless, and then select the 802.11a/na tab. The Wireless Settings screen for your 11a/n access point will display as shown in Figure 2-11 below. Figure 2-11 2. Configure the Wireless LAN settings based on the following field descriptions: • Wireless Mode. Select the desired wireless operating mode. Only 802.11a/n wireless stations can be selected from this menu. The default is 11na. The options are: - 11a - All 802.11a wireless stations can be used. Note: If you select this option and if other settings on this screen are disabled, then you must select the Turn Radio On radio button to enable available options on this screen. - 11na - All 11a and 11na wireless stations can be used. This is the default. • Turn Radio On. On by default, you can also turn off the radio to disable access through this device. This can be helpful for configuration, network tuning, or troubleshooting activities. 2-18 v1.0, May 2008 Basic Installation and Configuration