Olympus D-100 D-100 Instruction Manual - Page 46
Erasing Pictures (One-Frame Erase
View all Olympus D-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
46 VIEWING OR ERASING IMMEDIATELY AFTER SHOOTING Erasing Pictures (One-Frame Erase) You can increase the number of images remaining on a card by erasing unnecessary images. OK/menu button Operating Procedure Press until the monitor turns on. Check that the camera is set to the Playback mode by holding down the monitor button for a moment. Arrow pad 1/3 SELECT NO OFF NO NO SET OK 3 YES OFF NO Once erased, images cannot be restored. Check each image before erasing to avoid accidentally erasing images you want to keep. 1. Display the frame to erase by press- ing the or arrow pad key. (The frame can also be selected even when the 4-split or 9-split display is selected.) 2. Press the OK/menu button. [The monitor shows the playback mode menu 1/3. 3. Select by pressing the or arrow pad key. 4. Select "YES" by pressing the or arrow pad key. 5. Press the OK/menu button. [The selected image is erased. The orange lamp on the right of the viewfinder blinks during erasure. To cancel single-frame erasure: Select "NO" and press the OK/menu button.