Olympus D-100 D-100 Instruction Manual - Page 93
If Image Quality Is Poor
View all Olympus D-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
If Image Quality Is Poor 93 TROUBLESHOOTING When the image is too bright Cause The flash mode is set to the Fill-in Flash mode. The subject was too brightly illuminated. Remedy See Close the lens barrier to restore the Auto-Flash P. 56 mode, or select the Fill-In Flash mode Correct the exposure or shoot the subject from a P. 64 different angle or point the camera in a different direction and lock the exposure. When the image is too dark Cause Remedy See You blocked the flash with your finger, etc. Hold the camera correctly, taking care not to P. 28 cover the flash surface The subject was out of reach of the flash. Shoot the subject from a distance of less than P. 56 about 3 m/9.8 ft. You shot a dark subject against back Set the flash mode to the Fill-in Flash mode. P. 57 light. When the colors in an image shot indoors are abnormal Cause Remedy See The image color tone is affected by Set the flash mode to the Fill-in Flash mode. P. 61 the illumination light. The subject does not contain any white. Shoot the subject with something white in the P. 66 field of view or set the white balance control according to the current lighting condition. The white balance control setting is Set the white balance control according to the P. 66 wrong. lighting condition.