Onkyo HT-R640 Owner Manual - Page 39

First Time Setup-Continued Digital Input If you connect a component to a digital input jack, you must assign that jack to an input selector. For example, if you connect your CD player to the OPTICAL IN2 jack, you should assign that jack to the CD input selector. By default, the COAXIAL IN1 jack is assigned to the DVD input selector, although this can be changed. Input selector buttons 3 DIGITAL INPUT DIGITAL INPUT Here are the default assignments. Input selector Default assignment DVD HDMI1 VIDEO 1 OPT1 VIDEO 2 ---- VIDEO 3 OPT2 TAPE ---- CD OPT3 • VIDEO 4 is fixed to FRONT. • When HDMI IN 1 or 2 is assigned to an input selector in the "HDMI Video Setup" on page 40, the input selector assignment on this page is automatically set to HDMI 1 or HDMI 2. 1 Press the input selector button for the source that you want to DVD VIDEO 1 VIDEO 2 assign. VCR1 VCR2 (Digital inputs cannot be assigned to VIDEO 3 VIDEO 4 TAPE the TUNER input source) C D Press the [DIGITAL INPUT] button repeatedly to select COAX1, COAX2, OPT1, OPT2, OPT3, or - - - - (analog). • An input selector that has been assigned to IN1 or IN2 in the "HDMI Video Setup" (page 40) can be set to HDMI here. • There are no assignments for TUNER. • VIDEO 4 is used only for digital input from the front panel terminals. Examples: If you connect your DVD player to the OPTICAL IN 2 jack, set "DVD" to "OPT2." If you want to listen to audio from the component connected to the OPTICAL IN 3 jack when the VIDEO 1 input selector is selected, set "VIDEO1" to "OPT3." If you want to listen to audio from the component connected to the COAXIAL IN 1 jack when the VIDEO 2 input selector is selected, set "VIDEO2" to "COAX1." For input selectors that you don't want to assign a digital input jack, set to "---- (analog)." 2 DIGITAL INPUT Press the [DIGITAL INPUT] button. The current assignment appears. 39