Philips HDRW720 User manual - Page 82

PROBLEM, SOLUTION, In the TV Guide - dvd recorder user manual

Get Philips HDRW720 PDF manuals and user guides View all Philips HDRW720 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 82 highlights

Before you call an engineer PROBLEM Missing or wrong TV channels The cable box do not always react to the IR Blaster SOLUTION bWrong cable connection selected bThe Infrared (IR) Remote control signal interfere with the IR signal of the IR Blaster Put the IR Blaster closer to the front of the cable box. In the TV Guide On Screen™'LISTINGS' screen, I see too many or too less TV Channels bThe number of TV channels depends on the setting in the TV Guide On Screen™sytem settings. If you have a cable box installed (cable box 'YES'), then you should switch on the available channels (Channels above 125). bIf you have no cable box installed (cable box 'NO'), then you should switch off the channels which are not available. My cable box does not react on the remote control from the cable box or automatically switches through the channels There is picture or sound interference on TV reception: Distorted sound coming from a connected hi fi amplifier The picture is distorted or black and white during playback No sound signal at the digital output There could be difference in the search speed of a DVD and DVD+RW bIf the DVD-Recorder is switched off ( STANDBY m button) the cable box will be used from the TV Guide On Screen™system via the DVD-Recorder. If you want to watch TV-Channels from the cable box, you have to switch the DVD-Recorder on. Then you can select the TV Channels with the remote control from the DVD-Recorder or from the cable box. bBefore recording, select the recording mode as described in chapter 'Manual Recording', section 'Selecting the recording mode (quality)'. bChange the channel of the modulator. During standby hold on the remote the button 3 pressed to switch to channel 3. With button 4 you switch to channel 4. bHave your antenna checked. bThe DVD recorder is connected to the 'Phono-input' of your amplifier: This jack is provided only for a record players without a preamplifier. Select a different audio input. bThe TV system of the disc does not match that of your TV set (PAL/NTSC). bThe recording can be made in color only when the TV channels or the connected additional device send a color signal. Black-and-white signals containing no color information (color subcarriers) cannot be recorded. bCheck whether the sound settings match the selected inputs and connected additional devices. For more information, see section 'Sound setting' in chapter 'User preferences'. bDepending on the different structure of a DVD and a DVD+RW/+R this can lead to the different search speeds. This is not a fault in your machine. 75

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
75
PROBLEM
SOLUTION
Missing or wrong TV
channels
b
Wrong cable connection selected
The cable box do not
always react to the IR
Blaster
b
The Infrared (IR) Remote control signal interfere with the IR signal of the IR Blaster
Put the IR Blaster closer to the front of the cable box.
In the TV Guide On
Screen
™
'
LISTINGS
'
screen, I see too many
or too less TV
Channels
b
The number of TV channels depends on the setting in the TV Guide On Screen
™
sytem settings.
If you have a cable box installed (cable box 'YES'), then you should switch on the available channels
(Channels above 125).
b
If you have no cable box installed (cable box 'NO'), then you should switch off the channels which are not
available.
My cable box does not
react on the remote
control from the cable
box or automatically
switches through the
channels
b
If the DVD-Recorder is switched off (
STANDBY
m
button) the cable box will be used from the TV Guide
On Screen
™
system via the DVD-Recorder. If you want to watch TV-Channels from the cable box, you have to
switch the DVD-Recorder on.
Then you can select the TV Channels with the remote control from the DVD-Recorder or from the cable box.
There is picture or
sound interference on
TV reception:
b
Before recording, select the recording mode as described in chapter 'Manual Recording', section 'Selecting the
recording mode (quality)'.
b
Change the channel of the modulator. During standby hold on the remote the button
3
pressed to switch to
channel 3. With button
4
you switch to channel 4.
b
Have your antenna checked.
Distorted sound
coming from a
connected hi±fi
amplifier
b
The DVD recorder is connected to the 'Phono-input' of your amplifier: This jack is provided only for a record
players without a preamplifier. Select a different audio input.
The picture is
distorted or
black±and±white during
playback
b
The TV system of the disc does not match that of your TV set (PAL/NTSC).
b
The recording can be made in color only when the TV channels or the connected additional device send a
color signal. Black-and-white signals containing no color information (color subcarriers) cannot be recorded.
No sound signal at the
digital output
b
Check whether the sound settings match the selected inputs and connected additional devices. For more
information, see section 'Sound setting' in chapter 'User preferences'.
There could be
difference in the
search speed of a DVD
and DVD+RW
b
Depending on the different structure of a DVD and a DVD+RW/+R this can lead to the different search
speeds. This is not a fault in your machine.
Before you call an engineer