Pioneer 79AVi Owner's Manual - Page 56

06 Audio Settings menu 1 Press HOME MENU and select 'Audio Settings' from the on-screen display. 2 Highlight Virtual Surround, then use the Joystick (left/right) to change to '2V/ SRS TruSurround' or 'Off', as required. Audio Settings Audio DRC Legato PRO Hi-Bit Virtual Surround Channel Level 1/ 2 Off Off On Off Fix Channel Level • Default setting: Fix This setting allows you to set the level of each channel sent to the 5.1 channel analog outputs. 1 Press HOME MENU and select 'Audio Settings' from the on-screen display. 2 Highlight Channel Level, then use the Joystick (left/right) to change to 'Fix' or 'Variable', as required. 3 Press ENTER to make the setting and exit the Audio Settings screen. • You can also use the SURROUND button on the remote control to switch Virtual Surround on (2V/SRS TruSurround)/ Off. • Virtual Surround does not work with CD, MP3, DVD-Audio or SACD discs, or 96kHz Linear PCM soundtracks. • The Virtual Surround effect is output only through the analog AUDIO OUT (2ch) jacks. • Make sure that Audio Output Mode is set to 2 Channel (see Audio Output Mode on page 74). • How good the surround effect is varies with the disc. Audio Settings Audio DRC Legato PRO Hi-Bit Virtual Surround Channel Level 1/ 2 Off Off On Off Fix • Fix - Channel levels are fixed, but you can set the speaker distances • Variable - You can specify variable channel levels as well as speaker distances 3 If you chose Variable, use the joystick (down) to proceed to the next screen. Audio Settings Audio DRC Legato PRO Hi-Bit Virtual Surround Channel Level 1/ 3 Off Off On Off Variable 4 Variable setting only: Set the channel levels for each speaker. Audio Settings Channel Level L Channel Level C Channel Level R Channel Level RS Channel Level LS Channel Level SW 2/ 3 0.0 dB 0.0 dB 0.0 dB 0.0 dB 0.0 dB 0.0 dB 56 En