Pioneer 79AVi Owner's Manual - Page 76
Channel Level
UPC - 012562768335
View all Pioneer 79AVi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
08 Initial Settings menu • The center speaker (C) and subwoofer (SW) can be set from -6.5 ft. to +6.5 ft. relative to the front left/right speakers. • Surround left/right (LS/RS) speakers can be set from -20 ft. to +6.5 ft. relative to the front left/right speakers. 4 Move the cursor left to go back to the speaker list if you want to modify another speaker, or press ENTER to exit the Speaker Distance screen. • Speaker Distance settings do not affect SACD playback. Channel Level • Default setting: Fix You only need to make this setting if you connected this player to your amplifier using the 5.1 channel analog outputs. These settings do not affect any digital audio output. Initial Settings Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup Audio Output Mode Speaker Installation Speaker Distance Channel Level Fix Variable When set to Fix, the level of each of the 5.1 channel analog outputs is fixed. Choose Variable if you want to adjust the relative levels to balance the surround sound better for your listening room. Initial Settings Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup Auto L 0.0dB C 0.0dB R 0.0dB RS 0.0dB LS 0.0dB SW 0.0dB You can set the individual channel levels between -6dB and +6dB in 0.5 dB increments using the test tone output as a guide to set the correct levels. Adjust the levels until the output level from all channels sounds the same from your usual listening position. Note that Audio Output Mode (page 74) must be set to 5.1 Channel in order to use the test tone. Automatic: Select Auto to start the test tone output. No sound will be heard from the subwoofer. Initial Settings Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup Auto L 0.0dB C 0.0dB R 0.0dB RS 0.0dB LS 0.0dB SW 0.0dB As the test tone plays through each speaker in turn, it is highlighted on-screen. Use the Joystick (up/down) to adjust the channel output level of the current speaker. Move the cursor left to exit the test tone sequence, or ENTER to save the settings and exit the channel level setting screen. Manual: Use the Joystick to move the cursor up/down to select a speaker. Initial Settings Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup Auto L 0.0dB C 0.0dB R 0.0dB RS 0.0dB LS 0.0dB SW 0.0dB 76 En