Pioneer CDJ-1000MKII Operating Instructions - Page 28
Utilisation d, une Carte Multim, dia disponible, Using a Commercially Available Multimedia Card
View all Pioneer CDJ-1000MKII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
ADVANCED OPERATIONS/DÉMARCHES ÉVOLUÉES USING CUE POINTS/LOOP POINTS MEMORY 7 Storing Cue points 1. Enter Cue points using the A. CUE function or the CUE button. 2. Press the CUE/LOOP MEMORY button in Cue point standby mode (back Cue in play mode). ¶ [MEMORY] is shown in the display indicating that the Cue point has been stored. ¶ The Cue point lights in red in the calendar display and playback address display. 7 Storing Loop points 1. Enter the Loop in/out points to perform loop playback. 2. Press the CUE/LOOP MEMORY button during loop playback. ¶ [MEMORY] is shown in the display indicating that the Loop in/out points have been stored. ¶ The Loop in point lights in red in the calendar display and playback address display. 7 Calling stored Cue/Loop points When Cue/Loop points are stored, the calendar display and the playback address display lights in red. 1. Press the CUE/LOOP CALL button. ¶ When the CALL button (3) is pressed, Cue/Loop points are called in order from the beginning of the disc and the disc is set to standby at the Cue/Loop in point. 2. Press the PLAY/PAUSE button (6). ¶ Play or loop play starts. 7 Deleting stored Cue/Loop points When Cue/Loop points are stored, the calendar display and the playback address display lights in red. 1. Press the CUE/LOOP CALL button. ¶ When the CALL button (3) is pressed, Cue/Loop points are called in order from the beginning of the disc and the disc is set to standby at the cue or loop in point. 2. Press the CUE/LOOP DELETE button when in standby mode at the called point. ¶ [DELETE] is shown in the display indicating that the Cue/Loop points have been deleted. ¶ The Cue/Loop in point indication in the calendar display and the playback address display go off. Using a Commercially Available Multimedia Card When a Multimedia Card is inserted in the card insertion slot, the external memory (MMC) takes precedence. For each disc, 100 CUE/LOOP points, 3 hot start points, and 20 WAVE tracks can be recorded. An 8MB MMC can record data for 5,000 discs, and a 16MB MMC can record data for 10,000 discs. Using MMCs with capacity above 16MB will not result in greater disc data storage, however (maximum data recordable is for 10,000 discs). ¶ It takes 2 points (IN/OUT) for one loop. [CARD] Indicator 7 Insert Multimedia Cards Level surface Insert Multimedia Cards horizontally with the flat surface up and the notch facing to the right. Push the card gen- tly into the slot until it is seated. ¶ Removing Multimedia Cards Multimedia Card Confirm the [CARD] indicator is off, press the card in the slot once, wait for it to be ejected and gently pull it out. NOTE: ¶ The [CARD] indicator is on when the card is being accessed. Do not re- move the card or turn off the power when this indicator is on. (Otherwise the data may be corrupted.) 28 En/Fr UTILISATION DE LA MÉMOIRE DE POINTS DE REPÉRAGE / POINTS DE BOUCLE 7 Mémorisation des points de boucle (LOOP) 1. Entrez les points Entrée/Sortie de boucle (LOOP IN/OUT) pour effectuer une lecture à boucle. 2. Appuyez sur le bouton CUE/LOOP MEMORY pendant la lecture à boucle. ¶ Le voyant [MEMORY] apparaît, indiquant que les points Entrée/Sortie de boucle ont été mémorisés. ¶ Le point LOOP IN (initial) s'allume en rouge sur l'affichage calendrier et la visualisation de lecture. 7 Rappel des points de repérage/boucle (CUE/LOOP) Lorsque des points CUE/LOOP sont mémorisés, l'affichage calendrier et la visualisation de lecture s'allument en rouge. 1. Appuyez sur le bouton CUE/LOOP CALL. ¶ Lorsque le bouton CALL (3) est actionné, les points CUE/LOOP sont rappelés dans l'ordre à partir du début du disque et celui-ci se place en mode d'attente au point initial CUE/LOOP IN. 2. Appuyez sur le bouton PLAY/PAUSE (6). ¶ La lecture ou la lecture à boucle commence. 7 Effacement de points CUE/LOOP mémorisés Lorsque des points CUE/LOOP sont mémorisés, l'affichage calendrier et la visualisation de lecture s'allument en rouge. 1. Appuyez sur le bouton CUE/LOOP CALL. ¶ Lorsque le bouton CALL (3) est actionné, les points CUE/LOOP sont rappelés dans l'ordre depuis le début du disque et celui-ci se place en mode d'attente au point initial de repérage ou de boucle. 2. Appuyez sur le bouton CUE/LOOP DELETE lorsque l'appareil est en mode d'attente au point rappelé. ¶ Le message [DELETE] apparaît sur l'affichage, indiquant que les points CUE/LOOP ont été effacés. ¶ L'indication du point CUE/LOOP IN sur l'affichage calendrier et la visualisation de lecture s'éteignent. Utilisation d'une Carte Multimédia disponible séparément Lorsqu'une carte Multimedia est insérée dans la fente de l'appareil, la mémoire externe (MMC) obtient la priorité. Pour chaque disque, 100 points CUE/LOOP, 3 points de départ instantané et 20 plages WAVE peuvent être enregistrés. Une mémoire MMC de 8 Mo peut enregistrer les données de 5.000 disques et une mémoire MMC de 16 Mo celles de 10.000 disques. L'emploi de mémoires MMC d'une capacité supérieure à 16 Mo autorisera le stockage d'une quantité encore plus grande de données de disques, mais le maximum enregistrable sera de 10.000 disques. ¶ Toute boucle doit comporter 2 points (IN/OUT = Entée/Sortie) 7 Insertion de la carte Voyant de carte [CARD] Surface plate Multimédia Insérez à fond la carte Multimédia horizontalement, sa surface plate vers le haut et son arête vers la droite. Poussez délicatement la carte dans la fente jusqu'à Carte Multimédia ce qu'elle soit bien installée. ¶ Retrait de la carte Multimédia Assurez-vous que le voyant [CARD] est éteint, enfoncez la carte dans la fente, attendez qu'elle s'éjecte et retirez-la délicatement. REMARQUES: ¶ Le voyant [CARD] s'allume lorsque l'appareil accède à la carte. Ne retirez pas la carte et ne mettez pas l'appareil hors tension pendant que ce voyant est allumé, car les données pourraient en être altérées. ¶ Si le message [MMC I/O Err] apparaît quand vous insérez la carte Multimédia, retirez-la et essayez de l'insérer à nouveau. ¶ La carte Multimédia est un outil électronique de précision. Ne la pliez pas, ne la forcez pas et ne la laissez pas tomber. N'utilisez pas et ne rangez pas une telle carte dans un endroit soumis à de l'électricité statique ou à des parasites électriques.