Ricoh 2045 Basics Guide - Page 27
Make sure that Memory Trans
UPC - 026649003776
View all Ricoh 2045 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Memory Transmission A Make sure that Memory Trans- mission is selected. D Dial a destination. 2 If it is not, press [Memory TX]. B Place the original. Note ❒ You can send the first few pages from the exposure glass then the remaining pages from the ADF. After you remove the last page from the exposure glass, you have 60 seconds to insert the remaining pages in the ADF. ❒ Note that you cannot place pages on the exposure glass after you have started using the ADF. ❒ The original can be placed either in the ADF or on the exposure glass, until the {Start} key is pressed. Reference p.11 "Placing Originals" C Make the settings you require. Note ❒ If you make a mistake, press the {Clear/Stop} key, and then enter the correct number. Reference p.32 "Dialing" p.33 "Using Destination Lists" p.43 "Chain Dial", Facsimile Reference p.43 "Redial", Facsimile Reference E When sending the same orignal to several destinations (broadcasting), press [Add] to specify the destinations. Reference p.27 "Scan Settings" Note ❒ You do not have to press [Add] when adding a destination using the destination list. ❒ If you do not want to do a broadcast transmission, pro- ceed to step G. 19