Ricoh 2045 Basics Guide - Page 60

Troubleshooting Solving Problems This table lists some common problems and their solutions. Problem Causes and solutions Reference Image background appears dirty when received at the other end. Adjust scan density. p.29 "Image Density (Contrast)" Printed or sent image contains The ADF or exposure glass is "Maintaining Your Machine", spots. dirty. Clean them. General Settings Guide Make sure that ink or correction fluid is dry before placing originals. 4 Received image is too light. Request the sender to increase --- image density. When using moist, rough, or processed paper, the printed image may be partly invisible. Only use recommended paper. "Copy Paper", General Settings Guide When D appears on the display, toner is beginning to run out. Replace the toner cartridge soon. "DAdding Toner", General Settings Guide The machine failed to print re- If this happened when the re- p.79 "Substitute Reception", ceived fax messages. ceive file indicator was lit, a Facsimile Reference per or toner might disable printing. [Store] has been selected for [Reception File Setting]. Print the fax messages using a Web browser or the Printing Stored RX File function. p.110 "Printing fax information using a Web browser", Facsimile Reference and p.30 "Printing Received and Stored Documents", Facsimile Reference When B is lit, load paper into "Loading Paper", General Set- the cassette. tings Guide Message appears blank at the The original was placed up- p.11 "Placing Originals" other end. side down. Place it properly. Both transmission and receiv- Make sure that the modular --- ing are impossible. cord is correctly connected. The terminal adaptor setting --is incorrect. Check the setting. 52