Ricoh CL7200 Maintenance Manual - Page 21
Loading Paper in Tray 2 and Paper Feed Unit Type 7300
UPC - 026649024115
View all Ricoh CL7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Paper and Other Media B Load paper into the tray with the print side down. ❒ Check that the top of the stack is not higher than the limit mark inside the tray. C Carefully slide the paper tray into the printer, until it stops. Loading Paper in Tray 2 and Paper Feed Unit Type 7300 Paper of different sizes can be loaded in tray 2 and the 500- and 1000-sheet paper feed units (optional) by adjusting the positions of the side and end guides. This section describes loading paper in tray 2. ❒ If the side and end guides are in the right positions for the paper to be loaded, they do not have to be adjusted. A Slowly slide the paper tray out, until it stops. B Adjust the side guide according to the size and orientation of the paper as follows: 21
Paper and Other Media
21
B
Load paper into the tray with the print side down.
❒
Check that the top of the stack is not higher than the limit mark inside the
tray.
C
Carefully slide the paper tray into the printer, until it stops.
Loading Paper in Tray 2 and Paper Feed Unit Type 7300
Paper of different sizes can be loaded in tray 2 and the 500- and 1000-sheet pa-
per feed units (optional) by adjusting the positions of the side and end guides.
This section describes loading paper in tray 2.
❒
If the side and end guides are in the right positions for the paper to be loaded,
they do not have to be adjusted.
A
Slowly slide the paper tray out, until it stops.
B
Adjust the side guide according to the size and orientation of the paper
as follows: