Ricoh CL7200 Maintenance Manual - Page 86
Completed, Calibrate 1, K:3 M:3 C/Y:3/3, K:2 M:3 C/Y:3/3, K:2 M:2 C/Y:2/2
UPC - 026649024115
View all Ricoh CL7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Adjusting the Printer A confirmation message appears when complete. Completed Return to the color calibrate menu. G Press the {U} or {T} key to display "Start Calibr. 1", and then press the {# Enter} key. H Check "Yes" is displayed, and then press the {# Enter} key to print gra- dation correction sheet 1. I Set the gradation correction value of the highlighted part using correc- tion 1. For setting K (black) gradation, hold the correction value (0-6) for "K" of the correction value setting sheet 1 over the color sample (K) for gradation correction 1 of the Color Calibration Sample Sheet, and set the numerical value of the closest color using either the {U} or {T} key. Set the correction value using the supplied Color Calibration Sample Sheet and the gradation correction sheet 1 printed in the previous step. Set M (magenta), C (cyan), and Y (yellow) using the same method. Calibrate 1: K:3 M:3 C/Y:3/3 ❒ Each time the {U} or {T} key is pressed, the value increases or decreases respectively, in increments of 1. ❒ The correction value can be set between 0 and 6. J Press the {# Enter} key after setting the K (black) gradation. The cursor shifts to M (magenta). Calibrate 1: K:2 M:3 C/Y:3/3 K Set the gradation correction values for M (magenta), C (cyan), and Y (yel- low) using the same procedure as for the K (black). L If you finished all settings, ensure that the cursor is on the correction value for Y (yellow), and then press the {# Enter} key. Calibrate 1: K:2 M:2 C/Y:2/2 The example shows the display of the control panel when the correction value for each color is changed to 2. 86