Samsung SCX 6555N User Manual (ENGLISH) - Page 35
Media sizes supported in each mode, Guidelines for special print media, Copy mode - fuser
UPC - 635753610314
View all Samsung SCX 6555N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Media sizes supported in each mode MODE SIZE SOURCE Copy mode Letter, A4, Legal, • tray 1 Oficio, Folio, • optional tray 2 Executive, JIS B5, A5, • multi-purpose tray A6 • high capacity feeder Single side printing All sizes supported by the machine • tray 1 • optional tray • multi-purpose tray • high capacity feeder Duplex printinga Letter, A4, Legal, Folio, • tray 1 Oficio, JIS B5, ISO B5, • optional tray Executive, A5, Statement • multi-purpose tray • high capacity feeder Fax modeb Letter, A4, Legal • tray 1 • optional tray • high capacity feeder a. 75 to 90 g/m2 (20 ~ 24 lb) only b. Only the optional fax kit is installed. Guidelines for special print media MEDIA TYPE GUIDELINES Envelopes • Successful printing on envelopes depends upon the quality of the envelopes. When selecting envelopes, consider the following factors: - Weight: The weight of the envelope paper should not exceed 90 g/m2 or jamming may occur. - Construction: Prior to printing, envelopes should lie flat with less than 6 mm curl, and should not contain air. - Condition: Envelopes should not be wrinkled, nicked, or otherwise damaged. - Temperature: You should use envelopes that are compatible with the heat and pressure of the machine during operation. • Use only well-constructed envelopes with sharp and well creased folds. • Do not use stamped envelopes. • Do not use envelopes with clasps, snaps, windows, coated lining, self-adhesive seals, or other synthetic materials. • Do not use damaged or poorly made envelopes. • Be sure the seam at both ends of the envelope extends all the way to the corner of the envelope. 1 Acceptable 2 Unacceptable • Envelopes with a peel-off adhesive strip or with more than one flap that folds over to seal must use adhesives compatible with the machine's fusing temperature for 0.1 second. Check your machine's specification to view the fusing temperature, see page see "General specifications" on page 112. The extra flaps and strips might cause wrinkling, creasing, or jams, and may even damage the fuser. • For the best print quality, position margins no closer than 15 mm from the edges of the envelope. • Avoid printing over the area where the envelope's seams meet. 34 _Loading originals and print media