Samsung SCX 6555N User Manual (ENGLISH) - Page 89
Clearing paper jams, In the tray 1
UPC - 635753610314
View all Samsung SCX 6555N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
5. Close the white document background and the scanner lid. Then load the removed pages back into the DADF. CLEARING PAPER JAMS When a paper jam occurs, the warming message appears on the display screen. Refer to the table below to locate and clear the paper jam. MESSAGE LOCATION OF JAM GO TO Paper Jam in tray 1, Paper Jam in tray 2, Paper Jam in tray 2 (HCF), Paper Jam in tray 3, Paper Jam in tray 3 (HCF), Paper Jam in tray 4, Paper Jam in MP tray In the paper feed area (tray 1, optional tray, or multi-purpose tray) See "In the multipurpose tray" on page 92. See "In the optional tray" on page 89. See "In the optional high capacity feeder" on page 90. Paper Jam in exit area In the fuser area or around the toner cartridge See "In the fuser area or around the toner cartridge" on page 92. Paper Jam inside of In the paper exit area See "In the paper exit machine area" on page 92. Paper Jam at the bottom of duplex path, Paper Jam at the top of duplex path, Paper Jam inside of duplex path In the duplex unit See "In the duplex unit area" on page 93. Paper jam in front of In the stacker unit finisher See "Paper jam in front of finisher" on page 93. Paper jam inside finisher, Paper jam inside finisher's duplex In the stacker unit See "Paper jam inside finisher, Paper jam inside finisher's duplex" on page 93. Paper jam at exit of In the stacker unit finisher See "Paper jam at exit of finisher" on page 94. To avoid tearing the paper, pull the jammed paper out gently and slowly. Follow the instructions in the following sections to clear the jam. In the tray 1 1. Pull out the paper tray to open. After you pull it out completely, lift the front part of the tray up slightly to release the tray from the machine. 2. Remove the jammed paper by gently pulling it straight out. Once you remove the jammed paper here, open the side cover and then close it to clear the error message on the display. If there is any resistance, and the paper does not move immediately when you pull, stop pulling. Then: 3. Open the side cover. 88 _Troubleshooting