Samsung SMX-F40LN User Manual (user Manual) (ver.1.0) (English) - Page 105

connecting to a TV You can view the recorded videos and photos on a large screen by connecting the camcorder to a TV. W T OOFNF MODE CONNECTING TO A NORMAL (STANDARD DEFINITIOR ANUD)IOTV (16:9/4:3) To playback your recordings, the television must be NT-compatible. We rLecommend that you use the AC power adaptor as a power source for the camcorder. Check your TV's input jacks and select appropriate connection method according to the jack type. For VdIDeEtOails, refer to your TV user manual. Camcorder Normal TV T VIEW CARD W Signal flow Audio/Video cable R AUDIO L VIDEO Use the provided Audio/Video cable to connect the camcorder to a TV as follows: 1. Connect the provided Audio/Video cable to the Audio/Video jack on the TV. 2. Turn on your TV and set the TV's input selector to the Input your camcorder is connected to. • Refer to the TV's instruction manual to see how to select the TV input. • If only a mono audio input is available on the TV set, use the white plug (audio L) on the audio cable. Stereo Type Monaural Type • Do not use excessive force when connecting the AUDIO VIDEO AUDIO VIDEO cables. R L • It is recommended to use the AC power adaptor as the power source. • Before connecting, make sure that the volume on Red White Yellow Yellow the TV is turned down: forgetting this may cause feedback from the TV speakers. White • Carefully connect the input and output cables to the corresponding connections on the device the camcorder is being used with. 9