Sharp VLAH150U Operation Manual - Page 69
Demonstration Mode
UPC - 074000352735
View all Sharp VLAH150U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Demonstration Mode You can watch a brief demonstration of the special VIEWCAM features in Demo mode. If the demonstration appears on the screen when you turn on the VIEWCAM for the first time, cancel the Demo mode to use your VIEWCAM. Power switch Canceling Demo Mode 1 During the demonstration, perform step 3 above. 2 Press ĭ or İ button (Q) to select "DEMO MODE", then press the SET button (B) (W) to select "OFF". MENU 2 SET FADE NORMA L AUTO REMOT E ON DEMO MODE O F F L ANGUA GE MENU button Operation buttons Watching the Demonstration 1 Make sure that there is no video cassette in the VIEWCAM. • If a cassette is in the VIEWCAM, Demo mode does not work. Perform the procedure on page 10 to remove it. 2 Hold down the Lock button and slide the Power switch to CAMERA. Lock button 3 Press the DISPLAY button to turn off the menu screen. Note: • The demonstration will stop if you press the MENU button. If you leave it for 60 seconds, or turn the power off temporarily and then set the Power switch to CAMERA, the demonstration will begin again. 3 Press the MENU button until appears. • If MENU 1 or 3 appears on the screen, press the PAGE button ( ) to display MENU 2. 4 Press ĭ or İ (C or D) button (Q) to select "DEMO MODE", then press the SET button (B) (W) to select "ON". • The demonstration begins. MENU 2 SET FADE NORMA L AUTO REMOT E ON DEMO MODE ON L ANGUA GE 60 References