Sony DCR-TRV70 Network Function/Application Operating Instructions - Page 136
Adjusting the LCD screen (CALIBRATION), Set the POWER switch to OFF CHG.
View all Sony DCR-TRV70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Troubleshooting Adjusting the LCD screen (CALIBRATION) If the buttons on the touch panel do not work correctly, follow the procedure below. (1) Set the POWER switch to OFF (CHG). (2) Eject the tape from your camcorder, then disconnect any connecting cable from your camcorder. (3) Set the POWER switch to VCR while pressing DISPLAY/BATTERY INFO on your camcorder, then keep pressing DISPLAY/BATTERY INFO on your camcorder for about five seconds. (4) Tap displayed on the screen with the supplied stylus. The position of changes. CALIBRATE Notes •If you do not tap the right spot, you need to repeat step 4. •You cannot calibrate the LCD screen when you close the LCD panel with the LCD screen facing out. For details of adjusting the LCD screen (CALIBRATION), refer to the operating instructions supplied with your camcorder. 136