Sony DCR-TRV70 Network Function/Application Operating Instructions - Page 25

Registering Bluetooth devices Registering a Bluetooth device To enable your camcorder to communicate with a Bluetooth device, the devices should be registered with each other. Here we describe how to register the Sony Modem Adaptor with Bluetooth Function. Once registration is complete, you do not have to reregister the Bluetooth device as long as you do not cancel registration. You can register up to three Bluetooth devices to your camcorder. Refer also to the operating instructions supplied with each Bluetooth device. For details of Bluetooth devices compatible with your camcorder, access the following URL: "http://www.myimagecam.com/" Using the Modem Adaptor with Bluetooth Function Connect your camcorder to a Bluetooth device by Bluetooth wireless technology. Preparation for Network Operation your camcorder Modem Adaptor with Bluetooth Function (not supplied) Notes •When using Sony BTA-NW1/BTA-NW1A Modem Adaptor with Bluetooth Function, place it so that there are no obstacles between your camcorder and the device. The distance between the devices must be within 10 m (33 feet). •The connection may be interrupted depending on the communication conditions. •When your camcorder is connected to a USB device, your camcorder cannot communicate via a Bluetooth device. •Do not remove the battery pack while your camcorder is communicating with Bluetooth devices. Doing so may cause malfunction of your camcorder. 1 Preparing a Modem Adaptor with Bluetooth Function Set a Modem Adaptor with Bluetooth Function to connection standby (BONDING). For details, refer to the operating instructions supplied with the Modem Adaptor. 25