Sony GV-D1000E Operating Instructions - Page 109

Customizing Your VCR Bыполнeниe yaльныx нacтpоeк видeомa a Changing the menu settings Icon/item A/VtDV OUT NTSC PB (GV-D1000E only) LCD B. L. LCD COLOR (GV-D1000) LCD COLOUR (GV-D1000E) Mode Meaning z OFF To output digital images and sound in analog format using your VCR. ON To output analog images and sound in digital format using your VCR (p. 88). z ON PAL TV To play back a tape recorded in the NTSC colour system on a PAL system TV NTSC 4.43 To play back a tape recorded in the NTSC colour system on a TV with the NTSC 4.43 mode z BRT NORMAL To set the brightness on the LCD screen to normal. BRIGHT To brighten the LCD screen. -- To adjust the color on the LCD screen, turn the SEL/PUSH EXEC dial. To get Low- To get High- intensity intensity STILL QLTY MOVIE SET IMAGESIZE REMAIN z FINE STANDARD z 320 × 240 160 × 112 z AUTO ON PRINT MARK ON z OFF To record still images in the fine image quality mode (p. 122). To record still images in the standard image quality mode. To record moving pictures in 320 × 240 size (p. 124). To record moving pictures in 160 × 112 size. To display the remaining capacity of the "Memory Stick" in the following cases: • For five seconds after inserting a "Memory Stick" into your VCR • When the capacity of the "Memory Stick" is less than one minute while the display shows. • For five seconds after completing a moving picture recording To always display the remaining capacity of the "Memory Stick." To write a print mark on the recorded still images you want to print out later (p. 172). To cancel print marks on still images. Note on NTSC PB (GV-D1000E only) When you play back a tape on a Multi System TV, select the best mode while viewing the picture on the TV. Note on LCD B.L. When you select BRIGHT, battery life is reduced by about 10 percent during recording. Even if you adjust LCD B.L., LCD COLOR (LCD COLOUR). The recorded picture will not be affected. (Continued on the following page) 109