Sony GV-D1000E Operating Instructions - Page 179

Troubleshooting Уcтpaнeниe нeиcпpaвноcтeй Type of trouble and their solutions Symptom The melody or beep sounds for five seconds. While editing using the i.LINK cable (DV connecting cable), the picture cannot be monitored. No function works even though the power is on. While charging the battery pack, the POWER ON/CHARGE lamp does not light up. You cannot charge the battery pack. While charging the battery pack, the POWER ON/CHARGE lamp flashes. Image data cannot be recognized with the USB connection. The cassette cannot be removed even if the cassette lid is open. Cause and/or Corrective Actions • Moisture condensation has occurred. c Remove the cassette and leave your VCR for at least one hour to acclimatize (p. 201). • Some troubles have occurred in your VCR. c Remove the cassette and insert it again, then operate your VCR. • Remove the i.LINK cable (DV connecting cable), and connect it again (p. 69). • Disconnect the power cord (mains lead) of the AC power adaptor or remove the battery, then reconnect it after about one minute. Turn the power on. If the functions still do not work, press the RESET button on the backside of your (recording) VCR using a sharp-pointed object. (If you press the RESET button, all the settings including the date and time return to the default.) • Charge is completed. • The battery pack is not properly installed. c Install it properly (p. 15). • The POWER switch is not set to OFF (CHG). c Set it to OFF (CHG) (p. 16). • The battery pack is not properly installed. c Install it properly (p. 15). • Something is wrong with the battery pack. c Please contact your Sony dealer or local authorized Sony service facility. • The USB cable was connected before installation of the USB driver was completed. c Uninstall the incorrect USB driver and re-install the USB driver (p. 98, 151). • The setting of USB MODE switch is not correct. c Set USB MODE switch correctly (p. 99, 152). • Moisture has started to condense in your VCR (p. 201). 179