Sony PEG-NZ90 CLIE Handbook (primary manual) - Page 105
Performing an IR HotSync, operation, To restore the local HotSync settings, Local, IR to a PC/Handheld
View all Sony PEG-NZ90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Performing an IR HotSync® operation Performing an IR HotSync® operation You can perform an IR HotSync® operation when you have prepared your computer settings, CLIÉ handheld settings, and Conduit Setup. 1 Rotate the Jog Dial™ navigator to select the HotSync icon and press the Jog Dial™ navigator. The HotSync screen is displayed. Tip You can also tap the HotSync icon on the Application Launcher screen to display the HotSync screen. 2 Tap Local. 3 Tap the arrow V and select IR to a PC/Handheld. 4 Point the IR port of your CLIÉ handheld directly at the IR port of the computer. For best results, your computer and your CLIÉ handheld should be 4 to 8 inches (approximately 10 to 20 centimeters) apart, and the path between your CLIÉ handheld and the computer must be clear of obstacles. 5 Tap the HotSync icon. The HotSync® operation starts. The message will be displayed to note that the HotSync® operation is complete. To restore the local HotSync settings When performing a local HotSync® operation with the cradle, you need to restore the local HotSync settings. 1 Connect the cradle to your computer. 2 Click the HotSync icon in the Windows task tray and check Local USB from the shortcut menu. Exchanging and updating data using a HotSync® operation 105 (Other HotSync® operations)