Sony PEG-NZ90 CLIE Handbook (primary manual) - Page 90
Adding detailed information to a service template, To select a connection type
View all Sony PEG-NZ90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Changing the Network preferences 3 Change the following settings if necessary: 1 Enter the telephone number used to access the modem. If necessary, enter a dial prefix (such as "9") to access an outside line, and tap the Dial prefix check box. You can enter a comma in the field to introduce a "pause" in the dialing sequence. Each comma equals a two second pause. 2 If the phone line you are using for your CLIÉ handheld has Call Waiting, select the Disable call waiting check box to avoid an interruption during a modem HotSync® operation. Note Each telephone company assigns a code to disable Call Waiting. Contact your local telephone company for the code you need. 3 If you want to use a calling card to place the call, select the Use calling card check box and enter the calling card number. Tip There is usually a delay before you enter your calling card number. Consequently, add at least three commas before your calling card number to compensate for the delay. 4 Tap OK. Adding detailed information to a service template If you are using one of the predefined service templates, you probably only need to enter your user name and telephone number. If you are creating a new service template, you may need to provide additional information to your ISP or dial-in server. Use the Details dialog box to add additional information to a selected service template. To select a connection type 1 On the Network Preferences screen, tap the service field. 2 Tap Details. The Details screen is displayed. Customizing your Sony CLIÉ™ handheld (Preferences) Continued on next page 90