Sony PEG-NZ90 CLIE Handbook (primary manual) - Page 113
Tap the, field beneath the modem name., Adjust the following settings if necessary, Enter phone
View all Sony PEG-NZ90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Performing a HotSync® operation via a modem 3 Tap the Enter phone # field beneath the modem name. The Phone Setup dialog box is displayed. 4 Adjust the following settings if necessary: 1 Enter the telephone number used to access the modem connected to your computer. 2 Enter a dial prefix (such as "9") to access an outside line, and tap the Dial prefix check box as needed. You can also enter a comma in the field to introduce a pause in the dialing sequence. Each comma equals a two second pause. 3 If the phone line you are using for your CLIÉ handheld has Call Waiting, select the Disable call waiting check box to avoid an interruption during the modem HotSync® operation. 4 If you want to use a calling card to place the call, select the Use calling card check box and enter the calling card number. 5 Tap OK. The HotSync screen is displayed again. Exchanging and updating data using a HotSync® operation 113 (Other HotSync® operations)