Sony PEG-NZ90 CLIE Handbook (primary manual) - Page 91
Customizing your Sony CLIÉ™ handheld Preferences, Enter the CLIÉ handheld's IP Address.
View all Sony PEG-NZ90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Changing the Network preferences 3 Tap the arrow V next to Connection type and select one of the following connection types. • PPP: Point-to-Point Protocol • SLIP: Serial Line Internet Protocol • CSLIP: Compressed Serial Line Internet Protocol Tip If you are not sure, try PPP; if that doesn't work, ask your Internet Service Provider or your System Administrator for the correct connection type. 4 Tap the arrow V next to Idle timeout and select one of the following options. • 1 Minute: Waits one minute before dropping the connection when you open another application that does not use the network. • 2 Minutes: Waits two minutes. • 3 Minutes: Waits three minutes. • Never: Keeps your PPP or SLIP connection open until you turn off your CLIÉ handheld (or until it times out). Note that this option will be more costly than others. 5 Tap the Query DNS check box to deselect it. 6 Enter the IP address for the Primary and Secondary DNS (Domain Naming System). Ask your Internet Service Provider or System Administrator for the correct Primary or Secondary DNS IP numbers. 7 If you need to enter the CLIÉ handheld's IP Address, tap the IP Address check box and display a permanent IP address field below the check box. Normally, you do not have to enter this IP address. If you are not sure, select Automatic and go to step 9. 8 Enter the CLIÉ handheld's IP Address. 9 Tap OK. Customizing your Sony CLIÉ™ handheld (Preferences) 91