Sony RM-AX4000 Operating Instructions - Page 34
Unit Settings, Setting the backlight, OFF_TIME
UPC - 027242677036
View all Sony RM-AX4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Unit Settings Setting the backlight The LCD display's backlight is preset at the factory to activate whenever the Remote Commander is operated, and to switch off automatically if you do not operate for more than 10 seconds. You can set the backlight automatic-off time, brightness, fade effect and which buttons activate the backlight. To change this setting, perform the following procedure. 1 While pressing the COMMANDER OFF button, press the MUTING button. COMMANDER OFF MUTING "SET" appears as the Display title. SU SET LEARN NG 2 Press "LIGHT" on the Label keys. LIGHT "LIGHT" appears as the Display title. SU LEARN NG LIGHT OFF_TIME LEVEL FADE ON_MODE 3 Press "OFF_TIME" on the Label keys. OFF_TIME The setting display for automatic-off time of the backlight appears. SU LEARN NG LIGHT LIGHT DISPLAY OTHER If "LIGHT" does not flash on the Label keys, press the Display title (SET) repeatedly until it appears. OFF_TIME (-) 10sec (+) 4 Press the (-) or (+) key to change the automatic-off time of the backlight. You can set the automatic-off time from 1 to 60 seconds. Each time the (-)/(+) key is pressed, the time decreases/increases by 1 second. For example, "20sec" on the Label keys means 20 seconds. 34