Home » Sony Manuals » Remote Controls » Sony RM-AX4000 » Manual Viewer

Sony RM-AX4000 Operating Instructions - Page 76

Appendix, Table of preset functions, TV

UPC - 027242677036

Add to My Manuals
Save this manual to your list of manuals

Page 76 highlights

Appendix Table of preset functions Note There may be some components or functions that cannot be operated. TV KEY DISPLAY FUNCTION POWER To turn the power on/off 1 - 9, 0, ENTER To change the channel (To change to channel 5, for example, press 0 and 5, or press 5 and ENTER.) • To enter the subchannel number 2PIC To turn on/off the twin pictures SWAP To swap the main picture and the sub picture DISPLAY To display the current channel on TV MAIN/SUB To switch the sound of the duplex broadcast INPUT To change the input mode WIDE To switch to the WIDE mode F To move the cursor upward f To move the cursor downward g To move the cursor to the right G To move the cursor to the left OK To enter the selection of the MENU display EPG To use the program guide MENU To call up the MENU KEY DISPLAY EXIT TOOLS VOLUME + VOLUME - CHANNEL + CHANNEL - MUTING RECALL TV_TUNER ANT/SW NORMAL SOUND PICTURE SLEEP FUNCTION To exit the MENU To go into the OPTION setting mode Volume up (TV) Volume down (TV) Channel up Channel down To mute the volume on the TV. Press again to turn muting off. To select the channel previously selected To return to the TV (to reset the external input) To switch the multiplex antenna input To return the picture and sound quality to the standard status To select the sound adjusting mode To select the picture adjusting mode To operate SLEEP function on the TV (works only for a TV with SLEEP function) 76

Section	Page
WARNING	2
Features	4
Table of Contents	6
Getting Started	8
Unpacking	8
Location and function of controls	8
Installing the batteries	10
When to replace the batteries	10
Setting the clock	11
Remote Commander settings and operating procedures	13
About the factory setting	13
How to set up the Remote Commander (On-PC Setup and On-Remote Setup)	13
Setting procedure for On-PC Setup	14
Setting procedure for On-Remote Setup	15
Setting up for your PC	16
Installing the “AX Remote Editor”	16
Installing the USB driver	17
Connecting the Remote Commander to your PC	19
Using the “AX Remote Editor” to set up the Remote Commander	19
Using “AX Remote Editor” - Help	20
Operating	21
Operating the Remote Commander	21
What is the XPRESS function?	21
Operating the XPRESS function	22
Operating components individually	25
To control the volume	27
To synchronize with the status of a component - SYNC-UP	28
To perform an easy action “Air-Slide” for XPRESS function	29
Executing a series of actions at a scheduled time - Timer function	29
To quickly switch the Timer on or off	30
Executing a series of commands with just one button - System Control function	31
Other useful functions	32
To operate the Remote Commander in the dark	32
Locking the controls - Hold function	33
To turn off all the components at one time	33
Unit Settings	34
Setting the backlight	34
Setting the LCD display	37
Setting the automatic-off time of the LCD display	37
Calibrating the alignment of the LCD display	39
Setting the contrast of the LCD display	40
Setting the beep	41
Adjusting the clock	42
To change the display to the daylight savings time (summer time) indication	43
Setting by On-Remote Setup	45
Setting the preset codes	45
Using non-preset remote control operations - Learning function	47
To clear the learned signal from a key or button	49
Learning up to 4 signals to one key	49
For accurate learning	51
Programming a series of actions with just one button -System Control function	51
To clear programmed series of actions for SYSTEM CONTROL button or System Control key	54
Setting the XPRESS macro activation	56
Controlling the volume of visual components connected to an audio component	57
Setting the Timer	59
To program the Timer	59
To clear a Timer macro	64
Changing the names of labels	65
Erasing all the settings - Reset	68
Additional Information	70
Precautions	70
Maintenance	70
Specifications	70
Troubleshooting	71
Appendix	76
Table of preset functions	76
TV	76
A-CBL (Analog Cable box)	77
D-SAT (Digital Satellite)	78
DVD (DVD player)	79
VCR (Video Cassette Recorder)	80
DVR (Digital Video Recorder) - DVR, PVR, DVR/Satellite Combo, DVR/Cable Combo	81
CD (CD player)	82
RCVR (Receiver/Amplifier)	83
DVDVR (DVR/DVD combo)	84
DVD-R (DVD Recorder)	85
D-CBL (Digital Cable box)	86
DAV (DVD/Receiver combo)	87
PJ (Projector)	88
TAPE (Cassette deck)	89
MD (MD deck)	90
LIGHT	91
Full Display	92

Match case Limit results 1 per page

KEY DISPLAY

POWER

1 – 9, 0, ENTER

•

2PIC

SWAP

DISPLAY

MAIN/SUB

INPUT

WIDE

EPG

FUNCTION

To turn the power on/off

To change the channel (To

change to channel 5, for

example, press 0 and 5, or

press 5 and ENTER.)

To enter the subchannel

number

To turn on/off the twin

pictures

To swap the main picture and

the sub picture

To display the current

channel on TV

To switch the sound of the

duplex broadcast

To change the input mode

To switch to the WIDE mode

To move the cursor upward

To move the cursor

downward

To move the cursor to the

right

To move the cursor to the left

To enter the selection of the

MENU display

To use the program guide

To call up the MENU

Appendix

Table of preset functions

Note

There may be some components or functions that cannot be operated.

KEY DISPLAY

EXIT

TOOLS

VOLUME +

VOLUME –

CHANNEL +

CHANNEL –

MUTING

RECALL

TV_TUNER

ANT/SW

NORMAL

SOUND

PICTURE

SLEEP

FUNCTION

To exit the MENU

To go into the OPTION

setting mode

Volume up (TV)

Volume down (TV)

Channel up

Channel down

To mute the volume on the

TV.

Press again to turn

muting off.

To select the channel

previously selected

To return to the TV (to reset

the external input)

To switch the multiplex

antenna input

To return the picture and

sound quality to the standard

status

To select the sound adjusting

mode

To select the picture adjusting

mode

To operate SLEEP function on

the TV (works only for a TV

with SLEEP function)