Symphonic CWR20V5 Owner's Manual - Page 82
Rec/otr], Channel - remote codes
View all Symphonic CWR20V5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Others Troubleshooting (cont'd) Symptom "Repairing" appears on the display. D V D Repairing 90% Picture noise appears. V C The tape does not play. R Recording does not start immediately after you press [REC/OTR] (VCR). The remote control does not function. The motor rotates even when playback / recording is stopped. Remedy • If there is a power failure or unplugging during recording, finalizing, formatting or editing (even after "wait for a moment." message is disappeared), a Repairing process will begin automatically soon after turning the unit on again. It may take several minutes up to about four hours. • Head cleaning for VCR may be necessary. Refer to "AUTO HEAD CLEANING". • Adjust tracking control for better picture by using [CHANNEL o / p] on this unit or [CH o / p] while you are playing a videotape. • No videotape is inserted. • Make sure the videotape has a record tab when you record to a videotape. If needed, cover the hole with cellophane tape. • Check if a videotape is in this unit. • The motor may rotate for the duration of approximately 5 minutes for efficient operation.This is not a malfunction. Error message Disc Error --- Please eject the disc. --Playback feature may not be available on this Disc. Region Error --- Please eject the disc. --Playback is not authorized in your region. Parental Lock On The current selected parental level prohibits playback. Recording Error This program is not allowed to be recorded. Recording Error This program is not recordable in Video mode. Recording Error Can not record on this disc. Recording Error This program is not allowed to be recorded on this disc. Recording Error This disc is protected and not recordable. Recording Error Disc is full. (No area for new recording) Cause Unplayable disc is inserted in the unit. The disc is upside down. The region of the DVD-Video disc does not match the ones on the unit. Solution Insert the standardized disc which bears the marks on page 40. Insert the disc with the labeled side facing up. Insert the DVD-Video disc with region code 1 or ALL. The current selected parental level in the Setting Menu prohibits playback. Check the "Parental Lock" setting (pages 73-74). The recording function encountered You cannot record copy prohibited a copy prohibited program. programs. You are trying to record a copyonce program onto the DVD-RW disc in Video mode. You are trying to record onto the disc which is unrecordable, or the disc status is unable to record. The disc is dirty. The disc is damaged. You are trying to record a copyonce program onto the DVD-RW disc which is not compatible with CPRM. You are trying to record on the protected disc. Set "DVD-RW Recording Format" to "VR mode" (page 27). Insert a recordable disc, and ensure the disc status satisfies the recording requirements (pages 25-26). Clean the disc with a cleaning cloth. Replace the disc. Insert a ver.1.1 or 1.2 CPRM compatible DVD-RW disc. Cancel the disc protect setting in the Disc Setting menu (page 35). You are trying to record onto the disc with no recording space left. Insert the recordable disc with enough recording space. 80