Texas Instruments TINSPIRE Data Collection Guidebook - Page 101
Charging the Lab Cradle, Charging with an AC Wall Charger - navigator
View all Texas Instruments TINSPIRE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
If the power is unable to support the experiment configuration, a warning indicates that the power available is insufficient for the experiment. You either need to charge the battery or plug the Lab Cradle into an external power source. When using the wall charger, TI-Nspire™ Cradle Charging Bay, or USB cable plugged into a powered computer, the Lab Cradle can be fully charged from a dead state in less than 12 hours when not being used. The battery is capable of supporting one full day of high-use, high-consumption sensor data collection or two full days of moderate to low consumption sensor data collection. Charging the Lab Cradle You can charge the Lab Cradle in a number of ways. • Wall charger • USB Cable connected to a computer • TI-Nspire™ Navigator™ Cradle Charging Bay Charging with an AC Wall Charger Connect the plug to a standard AC wall outlet and the mini-B USB connector to the TI-Nspire™ Lab Cradle. Charging with a USB Cable The Lab Cradle can be charged using a standard USB cable. Attach the mini-B connector to the Lab Cradle and the USB type A connector into the computer. The Lab Cradle will fully charge in less than 12 hours. TI-Nspire™ Lab Cradle 97