Texas Instruments TINSPIRE Data Collection Guidebook - Page 72
Using a Delay to Start the Collection, Disconnect the Lab Cradle. - nspire reviews
View all Texas Instruments TINSPIRE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
7. Review the settings. Verify the delay is at zero (no delay). Setting the delay at zero allows you to use the manual trigger button on the Lab Cradle to start data collection. 8. Click OK. The Remote Setup dialog box opens indicating the sensor is ready for remote collection. 9. Disconnect the Lab Cradle. 10. Click OK. When you disconnect the TI-Nspire™ Lab Cradle from the handheld or computer, verify the status. When the LED transfer is blinking amber, the Lab Cradle is ready to collect data. 11. Press the trigger button on the Lab Cradle. The data collection starts immediately. After you have collected data, see Retrieving Remote Data. Using a Delay to Start the Collection 1. Save and close any open documents. When performing experiments, TI recommends that you have only one document open. The system cannot determine which of the documents to use with the sensor if multiple documents are open. 68 Using Advanced Data Collection Options