Texas Instruments TINSPIRE Data Collection Guidebook - Page 16
Reversing a Sensor Reading Display, Setting the Collection Mode
View all Texas Instruments TINSPIRE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
To set the standing value to zero: 1. Click Experiment > Set Up Sensor. 2. Click the sensor, and then click Zero. Note: The sensors displayed in the sensor list are those attached or selected to use offline. The sensor value is now at zero. Reversing a Sensor Reading Display Use this feature to change the display of the reading. By default, pulling with a force sensor produces a positive force and pushing produces a negative force. Reversing the sensor allows you to display pushing as a positive force. If more than one sensor can be reversed, choose the one to reverse from the list. To reverse the display of the sensor reading: 1. Click Experiment > Set Up Sensor. 2. Click the sensor, and then click Reverse. The sensor display is now reversed. If you are in Meter View, the reverse indicator appears " " after the sensor name. Reverse indicator Setting the Collection Mode Use Collection Mode to select the appropriate mode for the experiment. The default Collection Mode is Time Based for new experiments. If you have unsaved data when you change the mode, a warning message states that changing modes clears unsaved data. You can only use the Photogate timing mode with the Vernier Photogate sensor. You can only use the Drop Counting mode with the Vernier Drop Count sensor. 12 Performing an Experiment