Texas Instruments TINSPIRE Data Collection Guidebook - Page 71
Enabling a Disabled Trigger, Using the Manual Trigger to Start the Collection
View all Texas Instruments TINSPIRE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
8. (Optional) Select Experiment > Advanced Set up > Triggering to verify the active indicator is set to Enabled. Important: When the trigger is enabled, it stays active until it is disabled or you start a new experiment. Enabling a Disabled Trigger If you set the trigger values in the current experiment, and then disable them, you can enable the triggers again. To enable a trigger: Click Experiment > Advanced Set Up > Triggering > Enable. The trigger is now active. Disabling an Enabled Trigger To disable the active trigger. Click Experiment > Advanced Set Up > Triggering > Disable. The trigger is no longer active. Using the Manual Trigger to Start the Collection 1. Save and close any open documents. When performing experiments, TI recommends that you have only one document open. The system cannot determine which of the documents to use with the sensor if multiple documents are open. 2. Create a new document. Creating a new document ensures that the Vernier DataQuest™ application is set to its default values. 3. Attach a sensor to the TI-Nspire™ Lab Cradle. 4. Attach the TI-Nspire™ Lab Cradle to the computer or handheld. 5. Set up an experiment. 6. Click Experiment > Advanced Set Up > Remote Collection > TI-Nspire Lab Cradle. The Remote Setup Details dialog box opens. Using Advanced Data Collection Options 67