Texas Instruments TINSPIRE Data Collection Guidebook - Page 70
the sensor., When entering the trigger value, enter a value within the range - nspire update
View all Texas Instruments TINSPIRE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
3. Select the sensor from the Select the sensor to use as trigger dropdown list. Note: The menu displays the sensors connected to the TI-Nspire™ Lab Cradle. 4. Select one of the following from the Select the type of trigger to use drop-down list. • Increasing through threshold. Use to trigger on increasing values. • Decreasing through threshold. Use to trigger on decreasing values. 5. Type the appropriate value in the Enter the trigger threshold in units of the selected sensor field. When entering the trigger value, enter a value within the range of the sensor. If you change the unit type after setting the threshold, the value automatically updates. For example, if you use the Vernier Gas Pressure sensor with the units set as atm and you later change the units to kPa, the settings are updated. 6. Type the number of data points to keep before the trigger value occurs. 7. Click OK. The trigger is now set and enabled if values were entered. 66 Using Advanced Data Collection Options