Toshiba 32HLX95 Owners Manual - Page 25

3 Using the remote control Learning about the remote control The buttons used for operating the TV are described here. For a complete list of the remote control's functions, see the remote control functional key chart on pages 27-28. For a list of the buttons that operate the TV Guide On Screen™ system, see page 47 POWER turns the TV on and off. Press POWER to turn on the TV. The red LED indicator on the TV will be illuminated. Press POWER again to turn off the TV. SLEEP accesses the sleep timer (page 77). LIGHT The first press of the LIGHT button lights the keypad and turns on the Illumination mode. With the Illumination mode on, pressing any other key lights the keypad for 5 seconds (10 seconds if you're in programming mode). Subsequent presses of the LIGHT button toggle between turning the Illumination mode on and off. Channel Numbers (0-9, -/100) directly tune channels. The "-" button is used to tune digital channels (page 64) or to display the favorite channel list (page 42). INPUT selects the video input source (page 60). MODE cycles through the six remote control device modes: TV, CBL/SAT, VCR/PVR, DVD, AUDIO1, and AUDIO2. The TV mode should be chosen to control the TV and Built-in DVD. Every time you turn the power on, the TV starts from the TV mode. The mode indicator light will remain lit for a few seconds (page 29). PIC SIZE cycles through the five pictures sizes: Natural, TheaterWide 1/2/3, and Full (page 65). MENU accesses the main TV menu system (pages 33 and 34) or opens a menu in the TV Guide On Screen™ system (Chapter 7). TV GUIDE opens the TV Guide On Screen™ system (Chapter 7). INFO provides detailed information on highlighted items in the TV Guide On Screen™ system (Chapter 7). HOME ( ) accesses the home function of the Channel Browser™ feature (page 63) PIC MODE selects the picture mode (page 69). ENTER activates highlighted items in the main menu system and the TV Guide On Screen™ system. Arrow buttons (yzx •) When a menu is on-screen, these buttons select or adjust programming menus. (Also see x / •). x / • While watching TV, these buttons tune to the previous/next channel in the channel history (page 62). (Also see "Arrow buttons" above.) CH yz cycles through programmed channels when no menu is on-screen (page 40) and functions as page up/down when a menu is on-screen or when the TV Guide On Screen™ system is open (Chapter 7). Note: The error message "Not Available" will appear if you press a key for a function that is not available VOL yz adjusts the volume level. EXIT closes on-screen menus and the TV Guide On Screen™ system. CH RTN returns to the last viewed channel (page 64). TV/VCR selects TV mode to view one program while recording another. RECALL displays TV setting information on-screen (page 79). Remote control effective range For optimum performance, aim the remote control directly at the TV and make sure there is no obstruction between the remote control and the TV. MUTE reduces or turns off the sound (page 74). REC initiates the recording process when in the TV Guide On Screen™ system. FAV CH yz tunes to the next higher/lower favorite channel (page 42). FREEZE accesses the freeze feature (page 68). Point remote control toward remote sensor on front of TV. You can also control the built-in DVD when the MODE button on the remote control is in TV mode. For DVD operation the following buttons are used: DVD RTN, PBC, SLOW, SKIP, REW, FF, PAUSE, PLAY, OPEN/CLOSE, STOP, A-B REPEAT, and SEARCH (see chapter 10). 16.4 ft (5m) Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. 25