Toshiba 32HLX95 Owners Manual - Page 79
Using the Gray Level feature
View all Toshiba 32HLX95 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Chapter 8: Using the TV's features Displaying TV setting information on-screen using RECALL Understanding the auto power off feature To display TV setting information on-screen: Press RECALL on the remote control. The following information will display on-screen (if applicable): • Current input (ANT 1, ANT 2, VIDEO 1, etc.) • If ANT 1 or ANT 2 is STEREO the current input, Tuner Hold: On whether it is Cable TV NC-17 ("CABLE") or off-air On Timer: Weekdays 12:00pm Sleep Timer: 18 min. ("TV") Game Timer: 28 min. ANT 1 • Channel number (if in Natural ANT 1 or ANT 2 mode) 1080i 5:32pm CABLE 81-1 • Signal strength indicator Sample RECALL screen (bar graph in lower right corner of screen; for ATSC signal only) Note: The signal strength indicator will react to fading and increasing signals. • Time (if set) • On/Off timer settings (if set) • Remaining time on sleep timer (if set) • Remaining time on game timer (if set) • Stereo or SAP audio status • V-Chip rating status • Picture size • Tuner hold* (if applicable) *If you are recording on one tuner (for example, the digital tuner), you will be able to change channels on the other tuner only (the analog tuner in this example). The tuner from which you are recording is "on hold" (i.e., locked) so your recordings will not be affected by channel changes. • Video resolution To close TV setting information on-screen: Press RECALL again. The TV will automatically turn itself off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its broadcast for the day. This feature functions in ANT 1 and ANT 2 modes only. Understanding the last mode memory feature If the power is cut off while you are viewing the TV, the Last Mode Memory feature automatically turns on the TV when the power is resupplied. Note: You should unplug the TV's power cord if it is possible that you will be away from the TV for an extended period of time after the power is restored. Using the Gray Level feature The gray level feature will set the sidebars to three different levels of darkness. Sidebars are the blanks spaces on either side of a 4:3 viewing area. To set the gray level of the sidebars: 1. Press MENU and open the Setup menu. 2. Highlight Gray Level and press •. 3. Press yz to select your desired level of darkness (1 - Black, 2 - Dark Gray or 3 - Gray). Setup Installation 1 Sleep Timer 2 On/Off Timer 3 PC Settings HDMI Audio Auto Gray Level 2 Navigate Select CH RTN Back EXIT Exit Note: • The gray level feature does not affect video being viewed in 16:9 aspect ratio. • When receiving a signal that has sidebars (e.g., 4:3 aspect ratio video over a 1080i or 720p signal), the gray level feature will not be applied to the sidebars. Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. 79