Xerox 3600B User Guide - Page 16
System setup, Using control panel menus, Menu overview - drivers
UPC - 095205742640
View all Xerox 3600B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
2 System setup This chapter provides step by step information on setting up your printer. This chapter includes: • Using control panel menus • Menu overview • Printing a demo page • Changing the display language Using control panel menus A number of menus are available to make it easy for you to change the printer settings. The diagram on the next column shows the menus and all of the menu items available in each menu. The items in each menu and the options you can select are described in more detail in the tables beginning on page 2.2. Accessing control panel menus You can control your printer from the printer's control panel. You can also set the control panel menus while the printer is in use. 1 Press Menu until the menu you want appears on the bottom line of the display and press OK. 2 Press the Up/down arrow buttons until the desired menu item appears and press OK. 3 If the menu item has sub menus, repeat step 2. 4 Press the Up/down arrow buttons to access the desired setting option or the required value. 5 Press OK to save your selection. An asterisk (*) appears next to the selection on the display, indicating that it is now the default. 6 Press Start/Stop to return to Standby mode. After 30 seconds of inactivity (no key being pressed), the printer automatically returns to Standby mode. Note Print settings made from the printer driver on a connected computer override the settings on the control panel. Note Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine. Menu overview The control panel menus are used to configure the printer. The control panel provides access to the following menus: Information (See page 2.2.) Menu Map Configuraton Demo Page PCL Font List PS3 Font Lista FlashDirectory EPSON Font Secure Printa (See page 2.2.) Releasea Deletea Paper (See page 2.4.) Copies Tray 1MPT Size Tray 1MPT Type Tray 2 Type Tray 3 Typec Paper Source Bypass MP Tray Tray Chaining Layout (See page 2.2.) Orientation Simplex Margin Duplexb Duplex Marginb Image Adjust Graphic (See page 2.5.) Resolution Darkness Networka (See page 2.8.) TCP/IP EtherTalk NetWare Ethernet Speed Clear Setting Network Info. 802.1x Port 9100 LPR IPP SLP CentreWare IS SNMP System Setup (See page 2.5.) Language Power Save Auto Continue Altitude Adj. Auto CR Collationa SmartDuplexingb Job Timeout Job Held Timera Maintenance Parallel Setup USB Setup Panel Lockout Secure Print Low Toner Cm or inches Clear Setting Emulation (See page 2.7.) Emulation Type Setup Hex Mode a. Available when the installed memory is larger than 128 MB. b. Available when duplex unit is installed. c. Available when optional tray 3 is installed. 2.1